Budget Video Sales - TOLL FREE 800-772-1111 24/7

Buy Microphone Accessories

  
Rycote Modular Windshield WS 4 Kit

The Modular Windshield 4 Kit is suitable for shotgun microphones from 211mm up to 280mm in length and 19-34mm diameter with a 3-pin XLR connector such as the Sennheiser MKH 416, MKH 60 and Schoeps CMIT 5U.

The Modular Windshield Kit is the professionals' choice when maximum isolation from wind and handling noise is required.
This complete modular system can be configured to allow almost any microphone to be shock-mounted and provided with varying degrees of windshielding. Components may be ordered separately, or as one of a series of kits, which simplify the selection process for many common configurations.
A Modular Windshield Kit is comprised of the following three main components: Modular Suspension, Modular Windshield and Windjammer.

Modular Suspension
Our suspensions provides complete isolation against handling noise and cable-borne noises, by supporting the microphone in a cradle arrangement using Lyre suspension webs.

Windshield
The Windshield basket completely surrounds the microphone and its connector, sliding onto the Modular Suspension to provide up to 30dB of wind noise attenuation. This is the first layer of windshielding protection for your microphone.

Windjammer
The Windjammer introduced by Rycote in 1985, is high quality synthetic fur covers, designed to fit perfectly over the Modular Windshield. It gives an additional 20dB of wind noise attenuation. Fitted with a drawstring & toggle to allow snug and easy fitting. Modular Windshield Kits, including zipped Windjammer are also available on request.


QTY:

$ 599.00

Add to Cart

  
Rycote Softie Windscreen, for Sennheiser MKH 20, 40, 50

Rycote Softies provide optimum wind diffusion and noise rejection while remaining cost effective.

Features:
- 5cm (1.96in) in length
- Large size hole, fits the Sennheiser MKH 20, MKH 40 and MKH 50 microphones.


QTY:

$ 95.00

Add to Cart

  
Rycote Softie Windscreen, for Sennheiser MKH 60

Rycote Softies provide optimum wind diffusion and noise rejection while remaining cost effective.

Features:
- 18cm (7.08in) in length
- Large size hole, fits the Beyerdynamic MCE86 / MCE87, Sennheiser MKH60 and Sony ECM672 microphones.


QTY:

$ 95.00

Add to Cart

  
Rycote Softie Windscreen, for Sennheiser MKH 70

Rycote Softies provide optimum wind diffusion and noise rejection while remaining cost effective.

Features:
- 29cm (11.42in) in length
- Large size hole, fits the Sennheiser MKH 70 microphone.


QTY:

$ 120.00

Add to Cart

  
Rycote Softie Windscreen, Long with 19-22mm Hole

Rycote Softies provide optimum wind diffusion and noise rejection while remaining cost effective.

Features:
- 18cm (7.08in) in length
- Standard size hole, fits microphones with diameters from 19-22mm (0.74-0.87in).
- Fits the Sennheiser MKH 416 microphone


QTY:

$ 95.00

Add to Cart

  
Rycote Softie Windscreen, Medium with 19-22mm Hole

Rycote Softies provide optimum wind diffusion and noise rejection while remaining cost effective.

Features:
- 12cm (4.72in) in length
- Standard size hole, fits microphones with diameters from 19-22mm (0.74-0.87in).


QTY:

$ 95.00

Add to Cart

  
Rycote Softie Windscreen, Short with 19-22mm Hole

Rycote Softies provide optimum wind diffusion and noise rejection while remaining cost effective.

Features:
- 5cm (1.96in) in length
- Standard size hole, fits microphones with diameters from 19-22mm (0.74-0.87in).


QTY:

$ 95.00

Add to Cart

  
K-Tek KE-89CC Avalon Series Aluminum Boompole

The K-Tek KE-89CC Avalon Series Aluminum Boompole provides a moderately priced, lightweight boompole solution for ENG, EFP and other field recording applications. Its sturdy aluminum design is tough enough to endure the rigors of road use while remaining lightweight and travel worthy. This pole features an internally coiled cable and XLR connection at the base of the pole. A total of 4 aluminum sections telescope between 2' 5"-7' 2" (0.76-2.19m) and will easily store in any standard equipment case. The captive-collet coupling system lock each section in place for even further reliability.

Features:
- Measures 2' 5"-7' 2" (0.76-2.19m)
- Internally coiled XLR cable and connection at the base
- The KE-89CC features a bottom-mounted 3-pin XLR connection
- Designed to fit in any standard equipment case, for ENG, EFP and DV location production work
- Jam-resistant collar coupling
- Unique pole top design with cable retention slots and replaceable stailess steel mounting stud


QTY:

$ 174.95

Add to Cart

  
K-Tek KEG-100CC Avalon Series Graphite Boompole

The K-Tek KEG-100CC Avalon Series Graphite Boompole provides a moderately priced, lightweight boompole solution for ENG, EFP and other field recording applications. Its sturdy graphite design is tough enough to endure the rigors of road use while remaining lightweight and travel worthy. This pole features an internally coiled cable and XLR connection at the base of the pole. A total of 5 sections telescope between 2.02 to 8.9' (66 to 267cm) and will easily store in any standard equipment case. The captive-collet coupling system lock each section in place for even further reliability.

Features:
- Measures 2.02 to 8.9' (66 to 267cm)
- Lightweight Graphite Design
- Designed to fit in any standard equipment case, for ENG, EFP and DV location production work
- The KEG-100CC features a bottom-mounted 3-pin XLR connection at the base
- Jam-resistant collar coupling
- Unique pole top design with cable retention slots and replaceable stainless steel mounting stud


QTY:

$ 459.95

Add to Cart
 


We accept major credit cards with 
          PayPal